MOBIUS INSTITUTE - RELIABILITY IMPROVEMENT & VIBRATION ANALYSIS TRAINING AND CERTIFICATION PER ISO 18436

Mobius Institute - Vibration Analysis

Mobius - Simulator Spotlight

About us  |  Knowledgebase  |  Contact Us  |  Support  |  Buy Online  |  View Cart

Mobius Simulator >Spotlight<

 

Mobius Training Courses use many digital simulators that replicate real situations so that complex concepts to be more easily understood. Here are some examples that are used in our Classroom courses, DVD Training and On-line Distance Learning courses.

Please note that the simulator spotlight movies require Adobe® Flash® Player to be installed on your computer.

iTeachAlignment
Jason Tranter explains the iTeachAlignment simulator, available in the iLearnAlignment product....
iTeachAveraging 
Jason Tranter demontrates the iTeachAveraging simulator. This simulator demonstrates how averaging (and windowing) works with real vibration data....
iTeachBalancing
Jason Tranter demonstrates single and two plane balancing using the iTeachBalancing simulator....
iTeachBearings
Jason Tranter demonstrates the iTeachBearings simulator. This simulator demonstrates almost everything related to rolling element bearing analysis....
iTeachCaseStudies
Jason Tranter demonstrates iTeachCaseStudies, a simulator that shows live and historical data from real machines with real problems....
iTeachDynamics
Jason Tranter demonstrates the iTeachDynamics simulator. iTeachDynamics demonstrates how mass, stiffness and damping affect natural frequency....
iTeachFilters
Jason Tranter demonstrates iTeachFilters. This simulator shows how low pass, high pass, band pass and notch filters work....
iTeachFmax
Jason Tranter demonstrates the relationship between Fmax, resolution and the number of averages using the iTeachFmax simulator....
iTeachFundamentals - Rotor
Jason Tranter demonstrates the Rotor version of the iTeachFundamentals simulator. This program demonstrates where the time waveform comes from....
iTeachFundamentals - Spring
Jason Tranter demonstrates the Spring version of the iTeachFundamentals simulator....
iTeachGears
Jason Tranter uses the iTeachGears simulator to demonstrate how different teeth counts and different fault conditions affect the spectrum....
iTeachISORMS 
Jason Tranter demonstrates the iTeachISORMS simulator. This program demonstrates why a 1000Hz cut off in ISO 10816 can result in misleading trends....
iTeachMotors
Jason Tranter uses the iTeachMotors simulator to demonstrate how motors work, where the 2xLF frequency comes from and how spectra change....
iTeachPhase
Jason Tranter demonstrates the iTeachPhase simulator. This simulator demonstrates how to collect phase readings and introduces how those readings are used....
iTeachPhase [Resonance]
Jason Tranter demonstrates the iTeachPhase Resonance simulator. This program demonstrates phase measurements and how dynamics and sensor type affects phase readings....
iTeachResonance
Jason Tranter demonstrate the iTeachResonance simulator. This program demonstrates the basics of natural frequencies through to ODS and modal analysis....
iTeachResonance [Shaft]
Jason Tranter demonstrates the Shaft (rotor) version of the iTeachResonance simulator. This program demonstrates how mass, stiffness and damping affect the dynamics of a shaft....
iTeachSampling
Jason Tranter demonstrates the iTeachSampling simulator. This program demonstrates how the sample rate affects the waveform that you get to analyze....
iTeachSpectra
Jason Tranter demonstrates the iTeachSpectra simulator. This simulator shows where the peaks in the spectrum come from and how they relate to the machine....
iTeachSpectra 3D
Jason Tranter demonstrate the iTeachSpectra 3D simulator. This program demonstrates how the amplitude, phase and frequency combine to make signals....
iTeachTestRig
Jason Tranter demonstrate the iTeachTestRig simulator. This program demonstrates live data collected from a fault demonstration rig....
iTeachWindowing
Jason Tranter demonstrates the iTeachWindowing simulator. This program shows how windowing works and why it is necessary....

USA & Canada:  (877) 550-3400

International:  +1 (615) 216-4811

 

Email Us:  learn@mobiusinstitute.com

© 2017 - Mobius Institute - All rights reserved.

Australia  |  Costa Rica  |  Belgium  |  United States

and training centers in 50 countries